TELEDYNE OLDHAM SIMTRONICS iTRANS 2 - Page 10

iTRANS 2
FIXED POINT SINGLE OR DUAL GAS MONITOR
WITH DUAL ANALOG OUTPUTS
USER MANUAL
4
77036429-EN
Revision 7.0
• CSA Std C22.2 No.30-M1986-Explosion-Proof Enclosures for Use in Class I Hazardous
Locations
• CSA Std C22.2 No.142-M1987-Process Control Equipment
• CSA Std C22.2 No. 152-M1984-Combustible Gas Detection Instruments (iTrans 2 with
catalytic sensors only)
• CSA Std C22.2 No. 213-M1987-Non-incendive Electrical Equipment for Use in Class I,
Division 2 Hazardous Locations
Marking: Transmitter Class I, Div 1, Groups B, C, D – AEx d IIB + H2 T5
Sensor
(gas dependent)
(1)
Class I, Div 1, Groups B, C, D – AEx d IIB + H2 T5
(2)
Class I, Div 2, Groups A, B, C, D – AEx d IIB + H2 T5
The is certified under the IECEx scheme to:
• IECEx 60079-0:2011 (Ed. 6.0) – Explosive Atmospheres – Part 0: General requirements
• IECEx 60079-1: 2014 (Ed. 7.0) – Explosive Atmospheres – Part 1: Equipment protection
by flameproof enclosures ‘d’
• IECEx 60079-15:2010 (Ed. 4) – Explosive Atmospheres – Part 15: Equipment protection
by type of protection ‘n’
Marking: Transmitter Ex db IIB+H2 T5; IP66
Sensor (gas dependent) (1)Ex db IIB+H2 T5 ; IP66
(2)Ex nA IIC T5 Gc ; IP66
(1)
LEL, H
2
, O
2
, CO, H
2
S, SO
2
, HCN, PH
3
, NO
2
, NO, CO
2
(2)
Cl
2
, HCl, NH
3
, ClO
2