TELEDYNE OLDHAM SIMTRONICS iTRANS 2 - Appendix D Ordering Matrix

iTRANS 2
FIXED POINT SINGLE OR DUAL GAS MONITOR
WITH DUAL ANALOG OUTPUTS
USER MANUAL
77036429-EN
Revision 7.0
67
Appendix D Ordering Matrix
This appendix provides an ordering matrix for the gas monitor.
Base part number iTrans2-ABCDEFG
Single or dual on-board or remote toxic, combustible and oxygen sensors with dual 4-20 mA
outputs (one per sensor) or ModBus RTU outputs. Remote sensor capable of operation up to
200 meters from main transmitter. Operating temperature range –20°C to +50°C.
Example: iTrans2-1C21241 =On-board LEL (4-20 mA scale 0-
100) and remote mount H2S
(4-20 mA scale 0-500) with relays
A
= Sensor 1 Configuration
E
= Sensor 2 Configuration
B
= Gas sensor 1
F
= Gas sensor 2
C
= 4-20 mA output scale for sensor 1
G
= 4-20 mA output scale for sensor 2
D
= Optional on-board relays
A - Sensor 1
E – Sensor 2
0 = No sensor
1 = Explosion Proof / On-board 1 = Explosion Proof / On-board
2 = Explosion Proof / Remote 2 = Explosion Proof / Remote
3 = Non-hazardous Remote/Duct Mount 3 = Non-hazardous Remote/Duct Mount
4 = Explosion Proof / On-board with Splash Guard 4 = Explosion Proof / On-board with Splash Guard
5 = Explosion Proof / Remote with Splash Guard 5 = Explosion Proof / Remote with Splash Guard
6 = Stainless Steel / On-board 7 = Stainless Steel / Remote
7 = Stainless Steel / Remote
B - Gas sensor 1
F - Gas sensor 2
1 = Carbon Monoxide (CO) 1 = Carbon Monoxide (CO)
2 = Nitric Oxide (NO) 2 = Nitric Oxide (NO)
3 = Ammonia (NH
3
) 3 = Ammonia (NH
3
)
4 = Hydrogen Sulfide (H
2
S) 4 = Hydrogen Sulfide (H
2
S)
5 = Sulfur Dioxide (SO
2
) 5 = Sulfur Dioxide (SO
2
)
6 = Nitrogen Dioxide (NO
2
) 6 = Nitrogen Dioxide (NO
2
)
7 = Chlorine (Cl
2
) 7 = Chlorine (Cl
2
)
8 = Chlorine Dioxide (ClO
2
) 8 = Chlorine Dioxide (ClO
2
)