TELEDYNE OLDHAM SIMTRONICS iTRANS 2 - Page 74

iTRANS 2
FIXED POINT SINGLE OR DUAL GAS MONITOR
WITH DUAL ANALOG OUTPUTS
USER MANUAL
68
77036429-EN
Revision 7.0
9 = Hydrogen Cyanide (HCN) 9 = Hydrogen Cyanide (HCN)
A = Oxygen (O
2
) A = Oxygen (O
2
)
B = LEL Catalytic Plug-In (factory Methane calibration)
B = LEL Catalytic Plug-In (factory Methane
calibration)
C = LEL Catalytic Plug-In (factory Pentane calibration)
C = LEL Catalytic Plug-In (factory Pentane
calibration)
D = Carbon Monoxide - Hydrogen Null (CO - H
2
) D = Carbon Monoxide - Hydrogen Null (CO - H
2
)
F = Hydrogen Chloride (HCl) F = Hydrogen Chloride (HCl)
K = Phosphine (PH
3
) K = Phosphine (PH
3
)
L = Hydrogen (H
2
) L = Hydrogen (H
2
)
V = Carbon Dioxide (0-5% CO
2
) V = Carbon Dioxide (0-5% CO
2
)
W = Carbon Dioxide (0-100% CO
2
) W = Carbon Dioxide (0-100% CO
2
)
X = Carbon Dioxide (0-0.5% CO
2
) X = Carbon Dioxide (0-0.5% CO
2
)
C - 4-20 mA Output Scale for Sensor 1
G - 4-20 mA Output Scale for Sensor 2
0 = 0 - 999 0 = 0 - 999
1 = 0 - 500 1 = 0 - 500
2 = 0 - 100 2 = 0 - 100
3 = 0 - 50 3 = 0 - 50
4 = 0 - 30 4 = 0 - 30
5 = 0 - 10 5 = 0 - 10
6 = 0 - 2 6 = 0 - 2
7 = 0 - 1 7 = 0 - 1
8 = 0 - 20 8 = 0 - 20
9 = 0 - 200 9 = 0 - 200
A = 0 – 5.00 A = 0 – 5.00
B = 0 – 0.50 B = 0 – 0.50
D – Optional On-Board Relays
0 = No Relay Module (Modbus)
1 = With Optional On-Board Relays (Modbus)
2 = No Relay Module (HART)
3 = With Optional On-Board Relays (HART)