Teledyne 300E - Configuration Information (CFG)

Operating Instructions Model 300E Carbon Monoxide Analyzer
Instruction Manual
58 P/N 04288 REV: A
Example: If all passwords are enabled, the following keypad sequence would be
required to enter the SETUP menu:
SAMPLE RANGE = 50.0 PPM CO =XX.XX
< TST TST > CAL SETUP
SAMPLE ENTER SETUP PASS: 0
0 0 0 ENTR EXIT
PROMPTS
PASSWORD
Number
Exam
p
le: this
Password Enables the
Setup mode
SAMPLE ENTER SETUP PASS: 0
8 1 8 ENTR EXI
T
SETUP C.3
CFG DAS RNGE PASS CLK MORE EXI
T
Press individual
keys to set
Numbers
6.3.4. Configuration Information (CFG)
CFG key allows the user to review certain software configuration information. This
feature is useful for showing any special features that are present in the currently
installed Disk-on-Chip. It can be displayed by entering the key sequence:
Press NEXT of PREV to move back and
forth through the following list of
Configuration information:
SERIAL NUMBER
SOFTWARE REVISION
LIBRARY REVISION
CPU TYPE
SAMPLE RANGE = 50.0 MGM CO =XX.XX
< TST TST > CAL SETUP
SAMPLE RANGE = 50.0 MGM CO =XX.XX
CFG DAS RNGE PASS CLK MORE EXIT
SAMPLE M300E CO
A
NALYZE
R
CO =XX.XX
NEXT PREV EXIT
Press Exit at
Any Time to
Return to
SETUP Menu
Press Exit at Any
Time to Return
to Main SAMPLE
Dis
p
la
y