To Next PageTo Next Page
Need help?Do you have a question about the Teledyne 7600 and is the answer not in the manual?
General| Category | Analytical Instruments |
|---|---|
| Accuracy | ±1% of Full Scale |
| Manufacturer | Teledyne |
| Type | Oxygen Analyzer |
| Outputs | 4-20 mA |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Enclosure Rating | NEMA 4X |
Provides a general overview of the Model 7600 Infrared Gas Analyzer's capabilities and design.
Details the standard features and capabilities of the Model 7600 Gas Analyzer for accurate and reliable analysis.
Lists optional features and configurations for the Model 7600 analyzer, such as O2 sensors and communication functions.
Outlines the various industrial and research applications for which the Model 7600 Infrared Gas Analyzer is suited.
Describes the physical and functional aspects of the Model 7600's main unit, including its measurement capabilities.
Provides instructions for unpacking the Model 7600 analyzer and its components upon receipt.
Specifies criteria for selecting a suitable and safe installation location for the Model 7600 analyzer.
Details the procedures and considerations for mounting the Model 7600 analyzer within a rack or enclosure.
Explains how to mount the electronic interface module, including grounding and noise prevention.
Guides on connecting sample and calibration gases to the analyzer, including tubing, flowrate, and conditioning.
Outlines the procedures for making electrical connections, including power inlet and I/O module interface.
Describes the steps for testing the analyzer after installation, including initial warm-up and checks.
Introduces the front panel interface of the Model 7600, including keys, switches, and display.
Explains the two operating modes (measurement and user) and the available menus for configuration.
Details the measurement mode screen, showing component concentrations and how to navigate.
Covers the fundamental operations of the analyzer in measurement and user modes, including calibration initiation.
Guides on configuring analyzer settings like ranges, calibration parameters, alarms, and auto-calibration.
Outlines daily maintenance tasks, including zero/span calibration and flowrate checks.
Lists daily checks, phenomena, causes, and remedies for common analyzer issues.
Covers essential analyzer maintenance procedures, including sample cell cleaning.
Lists the general and standard specifications of the Model 7600 Infrared Gas Analyzer.
Details standard functions like output signal holding, range switching, and auto calibration.
Describes optional functions such as O2 correction, average value calculation, and average value resetting.
Outlines the performance characteristics of the Model 7600, including repeatability, linearity, and drift.
Specifies the required conditions and parameters for sample gas used with the analyzer.
Lists the necessary environmental and site conditions for installing the analyzer.
Details the product's compliance with relevant European Union directives and standards.
Provides diagrams and information on connecting external signals and devices to the analyzer's terminal blocks.
Offers a detailed explanation of the function of each terminal block connection on the analyzer.
