Teledyne BENTHOS UDB-9000 User Manual

xiv TELEDYNE BENTHOS
User’s Manual P/N M-270-10, Rev. B
Figure 4-64 University of Rhode Island Pop-Up . . . . . . . . . . . . . . . . . 4-44
Figure 6-1 Removing the Front Panel Screws . . . . . . . . . . . . . . . . . . . 6-2
Figure 6-2 Lifting the Edge of the Front Panel . . . . . . . . . . . . . . . . . . . 6-3
Figure 6-3 Lifting the Front Panel and Electronics Chassis
Out of the Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Figure 6-4 Loosening the Battery Bracket Screws . . . . . . . . . . . . . . . 6-4
Figure 6-5 Removing the Battery Bracket Screws . . . . . . . . . . . . . . . 6-4
Figure 6-6 Disconnecting the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Figure 6-7 Case Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Figure 6-8 Lowering the Electronics Chassis into the Case . . . . . . . 6-6
Figure 6-9 Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Figure 6-10 Confirm Screen Calibration Pop-Up . . . . . . . . . . . . . . . . . . 6-7

Teledyne BENTHOS UDB-9000 Specifications

General

Brand	Teledyne
Model	BENTHOS UDB-9000
Category	Measuring Instruments
Language	English