Telefire GUARD-7 - Test State

ADR-7000 / SAVER-7000 / GUARD-7
© 2017 – Telefire Fire & Gas Detectors Ltd Revision 0.98 October 2017
– Page 8 of 87 –
2.10 Access Levels
The control panel allows protection from unauthorized access through protection of
certain functions by various access levels.
The control panel includes an electronic locking mechanism that allows work in 4 access
levels:
 Access level 1 – not limited by password
 Access level 2 (operator) – protected by password. Provides all of access level 1
functions and allows access to additional functions that are performed on a regular
basis by the system operator
 Access level 3 (programmer) – protected by password. Provides all of access
level 2 functions and allows access to additional functions such as configuration and
programming
 Access level 4 (manufacturer) – protected by dedicated tool
There are six users, each of which has a different password:
User
Position
User 1
Security guard
User 2
Operator – an employee of building owner or manager that has undergone
user training
User 2
Operator – an employee of building owner or manager that has undergone
user training
User 3
Programmer – someone who is qualified to install and configure the system
User 5
Programmer – someone who is qualified to install and configure the system
User 6
Master Programmer – a senior person who is qualified to install and
configure the system
Action
User 1
Users 2
and 3
Users 4 and
5
User 6
Guard
Operator
Programmer
Senior
Programmer
Scrolling events




Silence buzzer




Silence sounders




Reset



Device address
programming



Enable / disable device



Walk test



Setting time and date



Setting holiday dates



Control panel configuration

