ADR-7000 / SAVER-7000 / GUARD-7
© 2017 – Telefire Fire & Gas Detectors Ltd Revision 0.98 October 2017
– Page 38 of 87 –
7 System Configuration (Programming) Process
The ADR-7000's site-specific data can be programmed and modified on site to respond
to each site's specific requirements.
ADR-3000 programming requires level 3 access.
After entering programming mode it is possible to set system configuration; program
devices, including alarm parameters and activation logic of NACs; create groups;
change passwords; and re-initialize detectors.
7.1 Menu Structure
Figure 16 Menu structure
To Next Page
Loading...
