ADR-7000 / SAVER-7000 / GUARD-7
© 2017 – Telefire Fire & Gas Detectors Ltd Revision 0.98 October 2017
– Page 87 of 87 –
Output to fire alarm routing equipment – EN 54-2 Section 7.9 option with
requirements
Output to fire protection equipment – EN 54-2 Section 7.10 option with requirements
Alarm Counter – EN 54-2 Section 7.13 option with requirements
Total loss of power supply – EN 54-2 Section 8.4 option with requirements
Output to fault warning routing equipment – EN 54-2 Section 8.9 option with
requirements
Test condition – EN 54-2 Section 10 option with requirements
14.6 EN 12094-1 Compliance
EN 12094 Compliance
The ADR-7000 complies with EN 12094-1 mandatory functions and the
following options with requirements:
Section 4.17: Delay of extinguishing signal
Section 4.18: Signal representing the flow of extinguishing agent
Section 4.19: Monitoring of the status of components
Section 4.20: Emergency hold device
Section 4.21: Control of flooding time
Section 4.22: Initiating of flooding time
Section 4.23: Manual only mode
Section 4.24: Triggering signals to equipment within the system
Section 4.25: Extinguishing signals to spare cylinders
Section 4.26: Triggering signals to equipment outside the system
Section 4.27: Emergency abort device
Section 4.28: Control of extended discharge
Section 4.29: Release of the extinguishing media for selected flooding zones
Section 4.30: Activation of alarm devices with different signals
14.7 CP-10
CP 10 Compliance
The ADR-7000 complies with CP 10:2005 requirements and includes the
following features:
Fire alarm sounder silencing – Clause 2.5.8
Fire alarm buzzer silencing – Clause 2.5.9
Alarm verification feature (AVF) – Clause 2.5.11
To Previous Page
Loading...
