ADR-7000 / SAVER-7000 / GUARD-7
© 2017 – Telefire Fire & Gas Detectors Ltd Revision 0.98 October 2017
– Page 86 of 87 –
Appendix C – Standards Compliance
14.4 UL 864 Compliance
UL 864 Compliance
The ADR-7000 is a UL 864 compliant system that can be used as a standard
fire detection and alarm system including sprinkler supervision; fire detection
and extinguishing release system; fireman phone system; a compliant smoke
control.
Please see section 12.3, UL Listing on page 77 for a list of devices tested for
UL compliance with the ADR-7000.
14.5 EN 54 – Options with Requirements
EN 54-2 Compliance
The ADR-7000 complies with all EN 54-2 mandatory functions and the
following options with requirements:
Section 7.8: Output to alarm devices
Section 7.9: Control of fire alarm routing equipment
Section 7.10: Outputs to fire protection equipment
Section 7.11: Delays to outputs
Section 7.12: Dependencies on more than one alarm signal
Section 7.13: Alarm counter
Section 8.3: Fault signals from points
Section 8.4: Total loss of the power supply
Section 8.9: Output to fault warning routing equipment
Section 9.5: Disablement of addressable points
EN 54-4 Compliance
The ADR-7000 complies with EN 54-4 requirements.
Ancillary Functions
The ADR-7000 provides the following additional features:
Auxiliary 24Vdc outputs
View and change user and programmer passwords
Lamp test
View event list
View software and hardware versions
Restore defaults
The ADR-7000 conforms fully to European standards BS EN 54-2:1998 and
BS EN 54-4:1998 and the following optional features:
Output to fire alarm devices – EN 54-2 Section 7.8 option with requirements
To Next Page
Loading...
