SUPPLEMENTS - СА62 Alarm Control Panel 59
072 Proximity card Register Put the card close to the proximity reader.
073 Proximity card Delete Press ENTER button to delete the card.
080 User code 8 (- - - -) Enter 4 or 6 digit code (depends on the settings at ADDRESS 1001 from the Engineering Menu) (- - - -) (- - - -) (- - - -)
081 User code 8 Attributes 1. DISARM 2. STAY ARM 3. BYPASS 4. PROGRAM 5. Part A 6. Part B from 1 to 5 from 1 to 5 from 1 to 5
082 Proximity card Register Put the card close to the proximity reader.
083 Proximity card Delete Press ENTER button to delete the card.
090 User code 9 (- - - -) Enter 4 or 6 digit code (depends on the settings at ADDRESS 1001 from the Engineering Menu) (- - - -) (- - - -) (- - - -)
091 User code 9 Attributes 1. DISARM 2. STAY ARM 3. BYPASS 4. PROGRAM 5. Part A 6. Part B from 1 to 5 from 1 to 5 from 1 to 5
092 Proximity card Register Put the card close to the proximity reader.
093 Proximity card Delete Press ENTER button to delete the card.
100 User code 10 (- - - -) Enter 4 or 6 digit code (depends on the settings at ADDRESS 1001 from the Engineering Menu) (- - - -) (- - - -) (- - - -)
101 User code 10 Attributes 1. DISARM 2. STAY ARM 3. BYPASS 4. PROGRAM 5. Part A 6. Part B from 1 to 5 from 1 to 5 from 1 to 5
102 Proximity card Register Put the card close to the proximity reader.
103 Proximity card Delete Press ENTER button to delete the card.
110 User code 11 (- - - -) Enter 4 or 6 digit code (depends on the settings at ADDRESS 1001 from the Engineering Menu) (- - - -) (- - - -) (- - - -)
111 User code 11 Attributes 1. DISARM 2. STAY ARM 3. BYPASS 4. PROGRAM 5. Part A 6. Part B 1 to 5 1 to 4 and 6 1 to 4 and 6
112 Proximity card Register Put the card close to the proximity reader.
113 Proximity card Delete Press ENTER button to delete the card.
120 User code 12 (- - - -) Enter 4 or 6 digit code (depends on the settings at ADDRESS 1001 from the Engineering Menu) (- - - -) (- - - -) (- - - -)
121 User code 12 Attributes 1. DISARM 2. STAY ARM 3. BYPASS 4. PROGRAM 5. Part A 6. Part B 1 to 5 1 to 4 and 6 1 to 4 and 6
122 Proximity card Register Put the card close to the proximity reader.
123 Proximity card Delete Press ENTER button to delete the card.
130 User code 13 (- - - -) Enter 4 or 6 digit code (depends on the settings at ADDRESS 1001 from the Engineering Menu) (- - - -) (- - - -) (- - - -)
131 User code 13 Attributes 1. DISARM 2. STAY ARM 3. BYPASS 4. PROGRAM 5. Part A 6. Part B 1 to 5 1 to 4 and 6 1 to 4 and 6
132 Proximity card Register Put the card close to the proximity reader.
133 Proximity card Delete Press ENTER button to delete the card.
140 User code 14 (- - - -) Enter 4 or 6 digit code (depends on the settings at ADDRESS 1001 from the Engineering Menu) (- - - -) (- - - -) (- - - -)
141 User code 14 Attributes 1. DISARM 2. STAY ARM 3. BYPASS 4. PROGRAM 5. Part A 6. Part B 1 to 5 1 to 4 and 6 1 to 4 and 6
142 Proximity card Register Put the card close to the proximity reader.
143 Proximity card Delete Press ENTER button to delete the card.
150 User code 15 (- - - -) Enter 4 or 6 digit code (depends on the settings at ADDRESS 1001 from the Engineering Menu) (- - - -) (- - - -) (- - - -)
151 User code 15 Attributes 1. DISARM 2. STAY ARM 3. BYPASS 4. PROGRAM 5. Part A 6. Part B 1 to 5 1 to 4 and 6 1 to 4 and 6
152 Proximity card Register Put the card close to the proximity reader.
153 Proximity card Delete Press ENTER button to delete the card.
(- - - -) means, that there is no default programmed user / manager code combination
TABLE 2 continues
- Default settings at hardware or software RESET. The default CONFIGURATION 0 is set by default.
To Next Page
Loading...
