Tellabs 6325 User Manual

MA365 • Rev. A2 19
Tellabs
®
6325 Edge Node 1 Overview
1 Overview
In this overview This overview gives a short introduction of the Tellabs 6325 node.
Product relationship The Tellabs 6325 node is part of the Tellabs product range for access and re-
gional telecommunication transmission networks based on the standards and
recommendations on SDH from ETSI and ITU.
Protection The possible protection schemes in the network includes SNC/I and SNC/N
protection.
Management Management of the Tellabs 6325 node can be performed from a local craft ter-
minal, or remotely from a network element manager or a network manage-
ment system (Tellabs
®
6300 network manager or Tellabs
®
8000 network man-
ager).
Short product description The Tellabs 6325 node is a product where SDH Cross-connect (SDXC), Add/
Drop Multiplexers (ADM) and Terminal Multiplexers (TM) are implemented
in a stand alone unit. In addition to the STM-1/4/16 interfaces 2 Mbit/s inter-
faces are available.
Layout of the Tellabs
6325 node
The figure below shows an example of the layout of a Tellabs 6325 node. The
modules to be installed in the subrack depends on the required configuration.

Tellabs 6325 Specifications

General

Brand	Tellabs
Model	6325
Category	Switch
Language	English