Tenda W15-Pro - Page 77

Document version: V1.0
70
---End
Parameter description
Parameter
Description
Enable
It specifies whether to enable the QVLAN function of the AP. By default, it is disabled.
QVLAN Mode
It specifies the QVLAN mode of the AP.
⚫
QVLAN: Enable the 802.1Q VLAN function of the AP.
⚫
IPTV: It is used in IPTV business scenarios. This function needs to be used with the
IPTV function of a Tenda enterprise router of the same brand. It can establish an IPTV
data transparent transmission channel between the router and the AP, and solve the
problem of difficult connection caused by the long distance between the IPTV set-top
box and the optical modem. In this mode, you need to bind the AP to the network
port of the IPTV set-top box on the router.
PVID
It specifies the ID of the default native VLAN of the trunk port of the AP.