TM SERIES
-XIX
TM Series Terex South Dakota, Inc. 472797 - 1/15
SAFETY RELATED DECALS
15.
16.
17.
All metal at boom tip is electrically connected.
Operator contact with ANY, live or grounded, line or object
while operator touches CONTROLS or BOOM TIP COMPONENTS
and boom tip contacts any other line or object can result in
Plastic or fiberglass covers offer limited electrical insulation.
Covers are NOT tested, certified, or maintained as insulating.
DO NOT Depend on machine covers for insulation
Comply with OSHA, ANSI, & NESC requirements
Cover all lines with insulated line hose or insulating blankets
Wear Personal Protective Equipment: Fall protection; Eye protection;
Maintain proper CLEARANCE to all lines and objects
Insulating: gloves, sleeves, and hard hat; & Special clothing
ELECTROCUTION HAZARD
DEATH OR SERIOUS INJURY
CONTROLS ARE NOT INSULATED OR ISOLATED
463602A
NOT INSULATED
Could Result In
DEATH OR SERIOUS INJURY
operate or maintain this Aerial Device
If YOU sell, install, offer for use, use,
You MUST COMPLY with the requirements of:
FAILURE TO FOLLOW
PROPER PROCEDURES
American National Standards Institute A92.2,
National Electric Safety Code, and OSHA
468476
To Next Page
Loading...
Need help?
General
