TM SERIES
1-12
472797 - 1/15 Terex South Dakota, Inc. TM Series
OPERATION GUIDELINES
7. Winch (Optional) Push to lower load “DOWN” or pay-out winch line.
Pull to raise load or wind winch line “UP”.
8. Platform Rotation
(Optional)
Push to rotate clockwise “CW” to end position.
Pull to rotate counterclockwise “CCW” to stowed position.
9. Platform Level Squeeze single stick enable lever and move lever side to
side to side.
Push to right to rotate platform in level direction.
Push to left to rotate platform in dump direction.
10. Jib Extend
(Optional)
Push to extend jib boom “OUT”.
Always have one pin installed to prevent jib
movement.
Pull to retract jib boom “IN”.
11. Lower Boom
Extend
Lift & Push lever forward to “EXTEND” out lower boom.
Lift & Pull lever back to “RETRACT” in lower boom.
CCW
ROTATION
PLATFORM
CW
475428
PLATFORM
LEVEL
USE ONLY IF PLATFORM
DOES NOT LEVEL
TILT LEVEL
JIB
EXTEND
RETRACT
EXTEND
RETRACT
LB EXT
(LIFT TO UNLOCK)
EXTEND
To Next Page
Loading...
Need help?
General
