Operating the Machine
4-7
Starting the Engine
Attention to the warning lights and instruments when starting the engine,
and operating, will help the operator monitor the machine systems and
components.
1. Turn the master switch, located on the inside panel of the battery box,
to the ON position.
2. Make sure the park-emergency brake lever is in 'PARK' position.
(Button pushed ‘In’)
3. Make sure the body control lever is in the 'NEUTRAL' position.
4. Make sure the transmission gear shift control is in the 'NEUTRAL'
position.
5. Insert the key into ignition switch. Turn the key fully clockwise until it
stops. Wait until all the gauges and warning lights on the dashboard
display have completed self check procedure. The audible warning buzzer
will also sound.
NOTICE: Ensure engine and transmission check lights extinguish. If not,
do not start and investigate.
6. Press the service brake pedal.
To Next Page
Loading...