Safety
2-3
SAFETY
The machine should be properly operated and maintained to keep it
in a safe, efficient operating condition. Be sure that all controls are
free of mud, grease, or other matter that might cause slips hazardous
to the operator, serviceman, or other personnel or equipment. Report
all malfunctions to those responsible for maintenance, and, do not
operate the equipment until corrected. Normal service or
maintenance performed as required can prevent unexpected and
unnecessary downtime.
This operations manual describes general inspections, servicing and
operation with the normal safety precautions required for normal
servicing and operating conditions. It is not a guide however, for other
than normal conditions or situations, and therefore, servicemen and
operators must be safety conscious and alert to recognize potential
servicing or operating safety hazards at all times, and take, necessary
precautions to assure safe servicing and operation of the machine.
These machines use a solution of high purity urea (AdBlue) in
the def tank. Avoid prolonged or repeated contact with skin.
After handling, always wash hands thoroughly with soap and
water. In case of contact with eyes, rinse immediately with water.
If large quantities are ingested or irritation persists seek medical
attention immediately.
These machines are equipped with cylinders containing com-
pressed nitrogen gas. Transportation of these machines by any
method may require a special permit from the appropriate
authority of the country involved. Consult your dealer for
details.
All information, illustrations and specifications contained in this
publication are based on the latest product information available at
the time of publication. The right is reserved to make changes at any
time without notice.
Continuing improvement and advancement of the design may cause
changes to your machine which may not be included in this
publication. Each publication is reviewed and revised, as required, to
update and include these changes in later editions.
This operations manual contains lubrication and routine servicing
instructions, most of which can be performed in the field.
Maintenance manuals containing repair/ rebuild procedures can be
obtained from your dealer.
To Next Page
Loading...