Operating Instructions
TA9 & TA10 Dumper 0803-3 December 2010 7-4
Seat Belt
• Sit on the seat, place the seat belt across the lap and insert the
inner buckle 'A' into outer buckle 'B' until it locks firmly into
position.
• To remove the seat belt, press the button ‘C' and pull inner
buckle 'A' away from outer buckle 'B'.
b
Seat Belt must be locked in position across the Operators
hips BEFORE operating the machine if ROPS/FOPS fitted
To Next Page
Loading...
