EasyManua.ls Logo

TESA CLINOBEVEL 2 - 12 TECHNICAL DATA

TESA CLINOBEVEL 2
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
12 teChniCal Data
Type Electronic inclinometer
with digital display
Interface
RS 232
Measuring principle Pendulum with built-in
capacitive sensor
Transmission speed
9600 bauds
Sign
7 bit
Stop 2 bits
Parity None
Measuring range ± 45° Power supply
Display LC display for the mea-
sured values along with
functions
Non-rechargeable
batteries
2 items, 1,5 V,
type LRC 6, AA
Angle Degree (°) in decimal
or sexagesimal unit-
sand gon
Battery life 35 to 50 h*
Inclination mm / m
in / 10 in ou in / 12 in.
mm ou in / base length.
mrad (milliradian) et
‰ (pour mille
Rechargeable
batteries**
2 items, 1,2 V,
type AG AF, NiMh
Battery life 25 to 45 h*
Setting time < 5 s Automatic shut off: 8 min after the last
operation
Function HOLD function External power
source**
+ 12 à + 48 Vdc /
200 to 500 mW
Scale division 5 Arcsec (≈ 0,025 mm
/ m). As per chapte 7.1
Overall
dimensions
150 x 150 x 35 mm
Mass 3 kg
Casing Steady casing in corro-
sion resistant cast iron
Temperature
Measuring faces 1 flat and 1° prismatic
faces perpendicular
one another for shaft
diameters from 17 up
to 94 mm
Operating
Storage
0 °C to 40 °C
- 20 °C to 70 °C
Marking Identification number
Delivery In a suited plastic case
including 1 instruction
manual with a declara-
tion of conformity
Base length 150 mm
Max. perm. error
(TA= 20°C)
< 10 Arcsec + 0.03%
from the measured
value
* Auto switch-off after 8 minutes of inactivity.
** Batteries may be left in their compartment
even if they are not used for powering the
instrument. Rechargeable batteries must be
removed for recharging. Also remove the in-
between item before reinserting the batteries.
Calibration Correction of gain
using simple 3-point-
methode

Related product manuals