TESA CLINOBEVEL 2 - 5 SWITCHING ON;OFF

< 3 s
ON/MODE
7
ENTER
Storing of an inserted value
Confirmation of an action / function
HOLD
Keep the displayed value (value is rigid)
The key SEND causes a return to mode « Measure »
Activation of a value PRESET
SEND/ESC
To trigger a data transfer via the RS 232 digital output
To cancel HOLD function, to return to mode « Measure »
To interrupt a measurement operation
5 switChing on/off
Function Key Display
Switching ON
Automatic
configuration to
the active functions
before the instrument
was switched off
Instrument ready
for measurement
Automatic switch off within
5 Min. after last operation
Switch on
with automatic
switch OFF
No
Yes