UNIMASTER
2
CONTENTS
1 General description 3
2 Assembling the Measuring head 4
3 Setting the measuring head to zero 5
3.1 Internal measurement (Fig.9) 5
3.2 External measurement (Fig.10) 5
4 Extensions 5
4.1 Adding extensions 5
4.2 Separating the extensions 5
5 Measuring 6
5.1 Measuring with offset measuring inserts 6
5.2 Use of roller supports(option No. 1160001) 6
6 Use of the supports 7
7 Manufacturing tolerances 7
8 Limits on Number of extensions 8
9 Note to storage and maintenance 9
10 Guarantee 9
11 Declaration of conformity 9
To Next Page