5 Using the product
29
3. Pressurise the system.
- The reading is displayed.
4. Quit measurement: [Stop].
After the measurement
1. Open filter chamber of the flue gas probe: turn it gently anti-
clockwise.
2. Remove the sealing plug from the gas path.
3. Insert the filter into the gas path and check that it is fitted
securely,
4. Close filter chamber of the flue gas probe.
5. Remove silicone hose from the probe shaft.
Pos: 51 /TD/Übersc hriften/7. Produkt i nstand halten @ 0\mod_117 3789831362_79.doc x @ 397 @ 212255555555 @ 1
To Next Page
Loading...
