-
or
-
- If the power supply was interrupted for a longer period: the
Date/Time menu is
opened.
-oor-
- There is an instrument error:
Error diagnosis is displayed.
E.4.2 Calling up a function
Functions which cannot be selected, because the required probe/sensor is not con-
nected, are shown in grey type.
1
Select the function: , .
- The chosen function is shown with a grey background.
2
Confirm selection: .
- The chosen function is opened.
E.4.3 Entering values
Some functions require values (numbers, units, characters) to be entered. Depending on
the function that is chosen, the values are entered via either a list field or an input editor.
List field
1
Select the value to be changed (number, unit):
, .
2
Set the value: , .
3
Repeat steps
1
and
2
as required.
4
Confirm the input: .
5
Save the input:
OK Save input .
OK
OK
OK
E. Operation
E.4 Basic operating steps
21