H. Transferring data
H.1 Protocol printer
If data are to be transferred to a Testo protocol printer via the infrared interface, the
printer that is to be used must be activated, see
Printer
, p. 28.
Data are printed out via the function key . The function is only available if a print-
out is possible.
H.2 PC/Pocket PC
Data transfer to a PC requires the “Measuring instrument/PC connecting cable
(0449 0047). Data is transferred to a Pocket PC via infrared.
You must also refer to the documentation that comes with the software.
Print
H. Transferring data
H.1 Protocol printer
47
To Next Page
Loading...
