Texas Instruments DLP - User Interface: Display Tab

www.ti.com User Interface Overview
3
DLPU074A–August 2018–Revised October 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
DLP
®
Display and Light Control EVM GUI Tool
Figure 2. Display Pages
Figure 1 shows the DLP Display and Light Control GUI tool. The GUI tool has 5 tabs on the left with 1 or
more pages for each tab, which will communicate with the EVM by issuing SPI or I
2
C commands. To
access a specific page, select the desired tab from the Main Navigation bar on the left (Figure 1) and then
select the specific page from the Page Navigation bar on the top (Figure 2). Table 2 provides a brief
description of the 13 pages.
Table 2. Page Description
Tab Page Section User Control Description
Information EVM Information EVM Information Get the status of the EVM
Display
Patterns and
Images
Display Patterns Set display patterns and checks which pattern is displayed
Display Images Set display images to the device
Video and Color
Video Information Modify the type of video output given to the device
Color Temperature Choose from select color temperatures
Display Settings
Display Settings Modify display and keystone settings
Keystone Correction Modify display and keystone settings
IntelliBright™
IntelliBright™ Modify IntelliBright settings
LED Current Modify LED current settings
Light Control
External Patterns Configure and display external patterns
Internal Patterns Configure and display internal patterns
Splash Patterns Configure and display splash patterns
Firmware
Backup Firmware Backup the firmware on the device
Update Firmware Update the firmware on the device
Update Flash Image Create new firmware image for the device