8.7.3 Peripheral Interrupt Vector
Table 8-6 shows the IRQ number and the interrupt group number for each periperals in this device.
Table 8-6. Interrupt vector number
Peripheral Name NVIC IRQ Group IIDX
WWDT0 0 0
WWDT1 0 1
DEBUGSS 0 2
NVMNW 0 3
EVENT SUB PORT0 0 4
EVENT SUB PORT1 0 5
SYSCTL 0 6
GPIO0 1 0
GPIO1 1 1
COMP0 1 2
COMP1 1 3
COMP2 1 4
TRNG 1 5
TIMG8 2 -
UART3 3 -
ADC0 4 -
ADC1 5 -
CAN-FD 6 -
DAC_OUT 7 -
SPI0 9 -
SPI1 10 -
UART1 13 -
UART2 14 -
UART0 15 -
TIMG0 16 -
TIMG6 17 -
TIMA0 18 -
TIMA1 19 -
TIMG7 20 -
TIMG12 21 -
I2C0 24 -
I2C1 25 -
AES 28 -
RTC 30 -
DMA 31 -
8.8 Flash Memory
A single bank of non-volatile flash memory is provided for storing executable program code and application data.
Key features of the flash include:
• Hardware ECC protection (encode and decode) with single bit error correction and double-bit error detection
• In-circuit program and erase operations supported across the entire recommended supply range
• Small 1kB sector sizes (minimum erase resolution of 1kB)
MSPM0G3507, MSPM0G3506, MSPM0G3505
SLASEX6A – FEBRUARY 2023 – REVISED JUNE 2023
www.ti.com
60 Submit Document Feedback
Copyright © 2023 Texas Instruments Incorporated
Product Folder Links: MSPM0G3507 MSPM0G3506 MSPM0G3505
To Next Page
Loading...
Need help?
General
