Texas Instruments TI-84 Plus Software Guide

TI-84 Plus Cabrië Jr. Application Page 22
Drawing Objects
Drawing a Point
1. Open the F2 menu, select Point, and then press Í to
select the Point tool.
2. Move the pointer to the desired location and then press Í
to create the point.
Drawing a Point on an Object
1. Open the F2 menu, press Í to select Point, highlight Point
On
, and then press Í.
2. Move the pointer to the object on which you want to draw a
point, and then press Í to select the object and draw the
point.
Tip The object blinks when the pointer is close enough to it for you
to select it.
Drawing a Point at the Intersection of Two Objects
Open the F2 menu, press ~ to display the submenu, highlight
Intersection, and then press Í.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-