TI-84 Plus Cabrië Jr. Application Page 39
Translation
1. Draw an object.
2. Draw a line segment or two points that define the length and
direction of translation.
3. Open the F4 menu and then select Translation.
4. Select either the line segment or the two points, and then
select the object. A new translated object is created.
Tip After you have defined the length and direction of the
translation, a point is drawn that shows where the translated
object will be placed.
Rotation
1. Draw an object.
2. Draw a point around which the object will be rotated, and then
draw three points whose angle will determine the angle of
rotation.
3. Open the F4 menu and then select Rotation.
4. Select the point around which the object will be rotated, and
then select the object to rotate.
To Next Page
Loading...
