TI-84 Plus Cabrië Jr. Application Page 29
Drawing a Circle Using the Compass Tool
When you draw a circle using the compass tool, a line segment or
the distance between two points is the radius for the circle.
1. Open the F3 menu and then select Compass.
2. Move the pointer to the line segment, and then press Í. A
dotted circle is drawn.
–or–
Move the pointer to the first point and press Í, then move
the cursor to the second point and press Í. A dotted circle
is drawn.
3. Use |, ~, }, † to move the dotted circle (if necessary), and
then press Í to finish.
Clearing the Screen
• To clear the entire screen, open the F5 menu, select Clear, and
then select All or press ‘ three times.
• To clear an object, open the F5 menu, select Clear, select
Object, move the pointer to the object, and then press Í.
To Next Page
Loading...
