TI-84 Plus Cabrië Jr. Application Page 44
Creating Labels and Entering Text
Use the Alpha-Num tool to label points, enter comments, and to
enter numerical values.
To label a point:
1. Open the F5 menu and select Alpha-Num.
2. Move the pointer to the point and press Í. The point blinks
when the pointer is close enough to the point to select it.
3. Type the label and press Í. The label is placed close to
the point.
Tip
• Entering text is the default option, so the alpha-lock is
automatically turned on when you first select
Alpha-Num.
• Labels for points can have up to five characters.
To type text on the drawing screen:
1. Open the F5 menu and select Alpha-Num.
2. Move the pointer where you want to type text and press Í.