TI-83, TI-83 Plus, TI-84 Plus Guide
Guide for Texas Instruments TI-83,
TI-83 Plus, or TI-84 Plus Graphing
Calculator
This Guide is designed to offer step-by-step instruction for using your TI-83, TI-83 Plus, or TI-84
Plus graphing calculator with the fourth edition of Calculus Concepts: An Informal Approach to
the Mathematics of Change. You should utilize the subject index on page 114 for this Guide to
find the location of a specific topic on which you need instruction.
Setup Instructions
Before you begin, check the calculator setup to be certain that the settings described
below are chosen. Whenever you use this Guide, we assume (unless instructed otherwise)
that your calculator settings are as shown in Figures 1, 2, and 3.
• Press
MODE and choose the settings shown in Figure 1 for the basic setup.
• Specify the statistical setup with STAT 5 [SetUpEditor] followed by 2ND 1 , 2ND 2
, 2ND 3 , 2ND 4 , 2ND 5 , and 2ND 6. Press ENTER to view the screen in
Figure 2.
• Check the window format by pressing
2ND ZOOM (FORMAT) and choose the
settings shown in Figure 3.
If you do not have the darkened choices shown in Figure 1 and Figure 3, use the
arrow keys to move the blinking cursor over the setting you want to choose and
press
ENTER .
Press
2ND MODE (QUIT) to return to the home screen.
TI-84 Plus Basic Setup
TI-84 Plus Statistical
Setup
TI-84 Plus Window Setup
Figure 1 Figure 2 Figure 3
Copyright © Houghton Mifflin Company. All rights reserved.
1
To Next Page
