TI-84 Plus Cabrië Jr. Application Page 49
3. Move the pointer where you want the measurement displayed
and press Í.
Slope
Use the Slope tool to find the slope of a line segment or line. If the
slope is too large to be displayed numerically, ### is displayed
instead.
1. Open the F5 menu, select Measure, and then select Slope.
2. Select the line or segment. The measurement is displayed.
The pointer changes to a hand, indicating that you can move
the measurement.
3. Move the pointer where you want the measurement displayed
and press Í.
To Next Page
Loading...
