Texas Instruments TI-84 Plus Software Guide

TI-84 Plus Cabrië Jr. Application Page 23
If the objects intersect within the display:
1. Move the pointer to the intersection point. The objects that
intersect at the pointer position blink.
2. Press Í to create the intersection point.
If the objects intersect outside of the display:
1. Move the pointer to the first object, and then press Í.
2. Move the pointer to the second object, and then press Í.
The intersection point is created.
Tip
• Usually, you can create a point on an object or a point at an
intersection by using the Point tool without selecting the 'Point
on', or 'Point at intersection' tools.
• When the current tool requires selection of a point(s), you can
create the point(s) by moving the pointer to an empty space
and pressing Í. For example, select the Line tool and
press Í at two empty positions on the screen. New points
are created at those positions, and the line is created.
Drawing a Line, Segment, or Circle
1. Open the F2 menu, select an object type, and then press
Í.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-