TI-84 Plus Cabrië Jr. Application Page 41
5. Select the object, select the point, and then select the dilation
factor. A new dilated object is created.
Note When a tool requires selecting several elements, the order in
which they are selected does not matter if they are of different
types, but it does matter for elements of the same type.
Example:
• If you create a line perpendicular to an existing line L and
going through point A, you can select A first and then L, or the
other way around.
• If you create the angle defined by 3 points A, B, C
selection is significant: the second point selected is the vertex
angle.
To Next Page
Loading...
