Quick Reference Guide Premier 48, 88, 168 & 640 Installation Manual
108 INS176
Key Attributes Attribute Types
Attributes
Press
to edit,
-
to select attributes,
to accept
U = User Test
2 = Use Pulse Timer 2
I = Inverted
3 = Use Pulse Timer 3
L = Latch Until
C = Custom Output 1, Stage A
1 = Use Pulse Timer 1
R = Random
UDL/Digi Options
Reset Digi Press
to reset communicator
Test Com? Press
to send test call to the ARC,
-
to initiate a call to the remote UDL
computer (using Call Back numbers 1, 2 or 3)
Set Call Waiting Press
to edit, enter call waiting number,
to accept
-
= Numbers 0 to 9
Insert a ‘#’
then
=
Clear Screen
,
(3 Second pause)
Insert a ‘
*’
W (10 Second pause)
Program Digi Use
-
to select ARC sets 1 - 3,
to edit
Protocol
Press
to edit,
-
to select protocol,
to accept
Disabled
Contact ID
EasyCom Pager
Fast Format
SIA Level II
SMS
Telephone Number 1
Press
to edit,
-
to enter telephone number,
to accept
Telephone Number 2
Press
to edit,
-
to enter number,
to accept
Account Number
Press
to edit,
-
to enter number,
to accept
Dialling Attempts
Press
to edit,
-
to enter number,
to accept
Reporting Channels
Press
to edit,
-
to select channels,
to accept
(only available for Fast Format)
Restoring Channels
Press
to edit,
-
to select channels,
to accept
(only available for Fast Format)
Open/Close Channels
Press
to edit,
-
to select channels,
to accept
(only available for Fast Format)
Reporting Areas
Press
to edit,
-
to select an area, (
= all areas,
= areas A – H
and I –P),
to accept (only available for Contact ID, SIA Level II, EasyCom Pager and
SMS Messaging)
Reporting Options
Press
to edit,
-
to select option,
to accept
(only available for Contact ID, SIA Level II, EasyCom Pager and SMS Messaging)
P = Priority Alarms
M = Maintenance
A = Normal Alarms
T = Tamper Alarms
C = Open/Close
C = Test Calls
O = Omits & Reinstates
R = Restores
Config.
Press
to edit,
-
to select option,
to accept
(only available for Contact ID, SIA Level II, EasyCom Pager & SMS Messaging)
A = Use Area Acc
A = Activate AV
S = Use SIA I
F = Use GSM First
R = Enable RadioPad
I = Connect Via IP
G = Enable GSM
To Next Page
Loading...
