Premier 48, 88, 168 & 640 Installation Manual Quick Reference Guide
INS176 111
Engineer Utils
View System Log Use
to move up and down through log (down moves back in time, up moves forward again),
to show area information or time and date,
-
or
to find specific events
Move backwards and forwards
View Omits/Reinstate Events
View Area/Time and date
View Maintenance Events
View Priority Alarms
View Tamper Alarms
View Normal Alarms
View Test Call Events
View Open/Close Events
View Matching Events
Do Bell Test Use
to select an option, use
-
or
to activate outputs
1: Test Bell 6: Test RedCARE
2: Test Strobe 7: Fast
3: Test Speaker 8: LCD Display
4: Test Digi 9: User Outputs
5: Test Panel
Do Walk Test Press
to display zones that have been tested/still need testing,
to make zones
Chime every time they are activated.
View Zone Status Use
-
to enter zone number or use
to search,
to walk test selected
zone,
to omit zone temporarily
System Tests Use
-
to select an option or use
to search,
to accept
View Sys. Status
Test Outputs (see Do Bell Test)
View Batt Status
View Version No.
Confirm Devices Use
to select network,
to confirm Devices,
to view error count,
to reset
error count
Check RKP Status Use
-
to select keypad,
to select network,
to display errors/tamper,
to test output,
to test sounder,
Check Exp. Status Use
-
to select expander,
to select network,
to display
zones/voltage/outputs/errors,
to test zones,
to test sounder,
-
to test outputs
Set System Time Use
-
to enter time (24-hour format)
,
to accept
Set System Date Use
-
to enter date
,
to accept
Location Text Press
to view Location Text
Print Log Use
-
to enter number of events to be printed,
to print log
Start Soak Test Use
-
to select an area, (
= all areas,
= areas A – H and I –P),
to
accept,
to start test
Change Eng.Code Use
-
to enter a code,
to accept
Adjust Volumes Use
to select Panel, Keypad or Expander speakers. Press
to edit,
-
to
enter a value,
to accept
Default NVM Data Press
-
to select an option or
to search,
to default
00: Panel Outputs 09: Remote Options
01: Digi Outputs 10: User Codes
02: Expander Outputs 11: System Timers
03: Keypad Outputs 12: System Options
04: Com???? Channels 13: Area Options
05: RedCARE Pins 14: System Text
06: Zone Types 15: UDL Options
07: Zone Text 16: Digi Options
08: Expander Options
View iD Data Use
to select loop,
to select normal scan, quick scan or biscuit mapping. Use
to select biscuit,
to edit,
-
to enter zone number,
to accept
Configure Radio Use
-
to select a device,
to learn device,
to map zone,
-
to
enter zone number,
accept
Alter Part Arms
Press
-
to enter zone number or use
to search,
,
or
to select Part Arms 1, 2 or 3
Part Arm 1
Part Arm 2
Part Arm 3
To Next Page
Loading...
