Programming the Control Panel Premier 48, 88, 168 & 640 Installation Manual
86 INS176
5: Duress
Duress users behave the same way as Standard users.
However, Duress users will activate any outputs programmed
as ‘Panic Alarm’ or ‘Duress’ whenever their code is entered.
6: Arm Only
Arm Only users can only arm or reset their assigned areas
and view the event log.
7: Door Strike
Door Strike users have no access to User functions or Menu
options. However, Door Strike users will activate any outputs
programmed as ‘Door Strike’ whenever their code is entered
(see page 64 for details).
8: Vacation
Vacation users behave the same way as Standard users.
However, Vacation users will automatically be deleted the first
time that the Master User code (User 01) is used to disarm
the system.
Vacation user can only be deleted by the Master user
after it has been used to disarm the system at least
once.
9: Custom
Custom users can access any functions and User menu
options that have been assigned to them in ‘User Options 1
or 2’ and ‘User Config’. This flexibility allows new User types
to be created that have their own unique set of
characteristics. Any number of Custom users can be
assigned to the system and each one will respond differently,
depending on the functions and features that have been
assigned to them.
User Functions and Options
The table below shows the options that are available to each user.
All users that have access to the ‘Arming Menu’ have the ability to ‘View Zone Status’, ‘Set Chime Areas’, ‘View Act.
Faults’ and ‘View Act. Counts’.
All users have access to the ‘User Menu’ have the ability to ‘View Event Log’, ‘Adjust Volumes’ and ‘Print Event Log’.
User Options 1
Engineer Master Manager Standard Local Duress Arm Only Door Strike Vacation Custom
Arming Arming Arming Arming Arming Arming Arming - Arming -
Disarming Disarming Disarming Disarming Disarming Disarming - - Disarming -
Omitting Omitting Omitting Omitting Omitting Omitting - - Omitting -
Eng. Reset - - - - - - - - -
- - - - Local Arming - - - - -
- - - - Local Disarm - - - - -
- - - - - - - - - -
Disarm First Disarm First Disarm First Disarm First Disarm First Disarm First - - Disarm First -
User Options 1
User Menu User Menu User Menu User Menu User Menu - User Menu - User Menu -
Eng. Program - - - - - - - - -
- - - - - - - -
-
-
- - - - - - - -
Vacation
-
Door Strike Door Strike - - - - - Door Strike - -
Call Rem. PC Call Rem. PC Call Rem. PC - - - - -
-
-
- - - - - Duress Code - - - -
Open/Close Open/Close Open/Close Open/Close Open/Close Open/Close Open/Close - Open/Close -
User Config.
Engineer Master Manager Standard Local Duress Arm Only Door Strike Vacation Not Used
Change Code Change Code Change Code Change Code Change Code - - - - -
Chime Zones Chime Zones Chime Zones Chime Zones Chime Zones - - - - -
Change Timer Change Timer Change Timer - - - - - - -
System Tests System Tests System Tests - - - - - - -
Setup Users Setup Users - - - - - - - -
Eng. Access Eng. Access Eng. Access Eng. Access Eng. Access - Eng. Access - Eng. Access -
Add Eng. code - - - - - - - - -
NVM Locking - - - - - - - - -
To Next Page
Loading...
