Premier 48, 88, 168 & 640 Installation Manual Programming the Control Panel
INS176 53
System Text
1,")" 1BX
),)-1&,+0
Yes
Yes
5
jkl
),)-1&,+0
601"*"51
1,B
"0"1"00$"
Yes
Use keys 1 - 6 to select
a text option or use the
SCROLL key to search
i.e. 5 = Banner Message
4
ghi
No
Use keys 0 - 9 to program
text the same way that a
mobile phone works
Press YES to
edit the text
),)-1&,+0
601"*&*"/0
1,B
++"/"00$"
Press NO followed by YES
to clear the screen or keep
pressing NO to change between
upper case, lower case,
numerical and predictive text
Yes
????
????
The system has 7 programmable messages.
1 - Reset Message
This 32-character message is displayed whenever the control
panel requires an Engineer reset.
2 - Anti-code Msg.
This 32-character message is displayed whenever the control
panel requires a Anti-code Reset.
3 - Service Message
This 32-character message is displayed whenever the control
panel requires Daytime reset.
4 - Location Text
This 32-character message is displayed whenever the
engineer views the location text in ‘Engineer Utils’.
5 - Banner Message
This 16-character message is displayed above the time and
date whenever the control panel is unarmed or fully armed.
6 - Part Arm Banner
This 16-character message is displayed above the time and
date whenever the control panel is part armed.
7 - Printer Header
This 32-character header will be printed whenever a log
printout is taken from the control panel or a Short Message
Service (SMS) text message is sent to a mobile phone.
Part Arm Text
1,")" 1BX
),)-1&,+0
Yes
Yes
6
mno
),)-1&,+0
16/*"51
Use keys 1 - 3 to select a
stay arm group or use the
SCROLL key to search
e.g. 3 = Stay Arm 3
3
def
Yes
"!1&*"/*:
Press No to
edit the text
),)-1&,+0
601"*&*"/0
Press YES to
clear screen
Use keys 0 - 9 to program
text the same way that a
mobile phone works
Yes
No
????
"51#,/16;
Press NO to select
clear screen
Text may be assigned to Part Arm 1, 2 or 3 to allow the user
to select the correct Part Arm by description instead of
number. A maximum of 16 characters can be programmed
for each of the Part Arms.
The 3 Part Arm messages are global messages and will
appear whenever one of the part arms are selected
regardless of which area is being part armed.
Text is programmed in a similar way to mobile phones.
Select characters by pressing the corresponding key the
appropriate number of times (to select a character on the
same key, press
to move the cursor along).
To Next Page
Loading...
