Premier 48, 88, 168 & 640 Installation Manual Installation
INS176 25
PC-Com
The PC-Com has two connectors. The 9-way D-type connector is
for connection to a serial port on a computer and the Molex
connector plugs onto Com 1 on the control panel.
UNI-Com
The UNI-Com has two connectors. The 9-way D-type
connector connects to any supported serial device, the Molex
connector plugs onto Com 1 on the control panel.
PRINT-Com
The PRINT-Com has two connectors. The 25-way D-type
connector connects to a Serial Printer and the Molex
connector plugs onto Com 1 on the control panel.
RPD-Com
The RPD-Com has two connectors. The 25-way D-type
connector connects to a Paknet Radio-Pad and the Molex
connector plugs onto Com 2 on the control panel.
GSM-Com
The GSM-Com has two connectors. The RJ45 connector connects
to a GSM Module, the Molex connector plugs onto Com 2 on the
control panel.
Connecting a Computer
The Premier 48, 88, 168 and 640 all support local uploading
and downloading between the control panel and a PC
running Wintex UDL software. Uploading and Downloading
can be used to program and interrogate the control panel.
In order for the computer to work correctly, ensure that it is
set to the following:
• UDL Password (see page 73 for details)
In order to upload and download to the control panel
locally, a PC-Com lead is required.
PC-Com
Com 2
F1
F2
F4
F5
Box
Tamp
JP7
Aux 12v 1Amp
Network 2
1Amp
Engi ne er R emo te
Com 1
Heartbeat
JP2
JP5
Jp9
Load
Defaults
Expansion
JP6
F3
Network 1
1Amp
Connecting a Printer
The Premier 48, 88, 168 and 640 all support printer facilities.
The printer is connected to the Com 1 connector located on
the control panel and can be used to print the control panel
event log.
In order for the printer to work correctly, ensure that it is set to
the following:
• Baud Rate = 4800
• Parity = None
• Start Bits = 1
• Stop Bits = 2
• Data Bits = 8
• DTR = Normal
• Columns = 40 or 80 (see page 50)
In order to connect a printer to the control panel, a
PRINT-Com lead is required.
DATAC or RS232 printer
RS232 Data
Connect to
COM1
PRINT-Com
To Next Page
Loading...
