Texecom PREMIER 88 - 5.10 Programming Part Arms; Alter Part Arms

Programming the Control Panel Premier 48, 88, 168 & 640 Installation Manual
98 INS176
5.10 Programming Part Arms
Alter Part Arms
1,")" 1BX
)1"//1/*0
1,")" 1BX
,+""12-
Part
Press NO to turn the
zone On or Off for the
selected Part Arm
???
No
Chime
Yes
,//1/*9
,+"889&0F
,//1/*:
,+"889&0F
,//1/*:
,+"898&0F
,//1/*:
,+"898&0F
Yes
Press OMIT to select Part Arm 1
e.g. CHIME = Part Arm 2
Press CHIME to select Part Arm 2
Press PART to select Part Arm 3
Use keys 0 - 9 to enter the
required zone number or
use the SCROLL key to search
e.g. 064 = Zone 10
Each area on the system can have up to 3 Part Arms.
When Part Arm 1, 2 or 3 is selected, pre-programmed zones
are omitted to allow access to certain parts of the building.