Thecus N4100 IP Storage Appliance
6
Making Connections
Make the following connections on the Thecus N4100 and then power up.
1. Connect an Ethernet cable from your network to the LAN 1 port on the back panel of the
Thecus N4100. (Step 1)
2. Connect the provided power cord into the universal power socket on the back panel. Plug the
other end of the cord into a surge protector socket. (Step 2)
3. Press the power button on the front panel to power on the Thecus N4100.(Step 3)
To Next Page
Loading...