Thecus N4100 IP Storage Appliance
34
Firmware Upgrade Screen
From the System menu, choose the Firmware Upgrade item and the Firmware Upgrade screen appears. A
description of each item follows:
Firmware Find a firmware configuration file with the Browse button and press Apply to
upgrade the firmware.
How to Upgrade Firmware
1. Use the Browse button to find the firmware file to upgrade to.
2. Press Apply.
3. The beeper beeps and the system’s Busy LED blinks until the upgrade is complete.
Note: The buzzer only beeps if it is enabled in the System Notification menu.
( 應該註明不能向下降版本 )
Administrator Password Screen
From the System menu, choose the Administrator Password item and the Change Administrator Password
screen appears. You are allowed to alter your password and Press Apply to confirm. A description of each
item follows:
New Password Type in the new administrator password
Confirm Password Type the new password again to confirm.
To Next Page
Loading...