Thecus N4100 IP Storage Appliance
7
Checking System Status
After making connections on the Thecus N4100 and powering up, check whether the system status is
ok or has trouble by observing indicators on the front panel and HDD trays.
System Status OK
The system status is OK if:
1. The front panel Power LED glows blue and the LAN 1 LED glows or blinks green.
2. The HDD Power LED on each HDD tray glows blue.
System Trouble
The system has trouble if:
1. Any LED glows red.
2. The system emits a continuous beeping sound.
If the system has trouble, refer to Appendix A: Troubleshooting.
To Next Page
Loading...
Need help?
General
