Thecus N4100 IP Storage Appliance
21
4. With the group or user selected, press one of the buttons from the three access level columns at the
top. The group or user then appears in that column and has that level of access to the Folder.
The three levels of access are:
Deny Denies access to users or groups who are displayed in this column.
Read Only Provides Read Only access to users or groups who are displayed in this column.
Writable Provides Write access to users or groups who are displayed in this column.
5. Continue selecting groups and users and assigning them access levels using the column buttons.
6. To remove a group or user from an access level column, press the Remove button in that column.
7. When you are finished, press the Submit button to submit and confirm your ACL settings.
Note: You must set the ACL for each folder for access by specific users and groups; otherwise the folder is
inaccessible to all users and groups.
To Next Page
Loading...