EasyManuals Logo

Thecus N5500 User Manual

Thecus N5500
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
See the following table for a detailed description of each item.
UPS Setting
Item Description
UPS Monitoring Enable or disable UPS monitoring.
Manufacturer Choose the UPS manufacturer from the dropdowns.
Model Choose the UPS model number from the
dropdowns.
Battery Status Current status of the UPS battery
Power Current status of the power being supplied to the
UPS
Seconds between power failure and
first notification
Delay between power failure and first notification in
seconds.
Seconds between subsequent power
failure notifications
Delay between subsequent notifications in seconds.
Shutdown the system when the
battery charge is less than
Amount of UPS battery remaining before system
should auto-shutdown.
Apply Press Apply to save your changes.
For a list of supported UPS units, see Appendix E: UPS Compatibility List.
Schedule Power On/Off
Using the N5500’s System Management, you can save energy and money by
scheduling the N5500 to turn itself on and off during certain times of the day.
From the menu, choose the Schedule Power On/Off item and the Schedule
Power On/Off screen appears.
To designate a schedule for the N5500 to turn on and off, first enable the feature by
checking the Enable Schedule Power On/Off checkbox.
Then, simply choose an on and off time for each day of the week that you would like
to designate a schedule by using the various dropdowns.
Finally, click Apply to save your changes.
32

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thecus N5500 and is the answer not in the manual?

Thecus N5500 Specifications

General IconGeneral
RAID levels0, 1, 5, 6, 10, JBOD
Storage drive size3.5 \
Hot-swap drive baysYes
Storage drive capacity- GB
Supported file systemsEXT3, XFS, ZFS
Storage drive interfaceSerial ATA
Total installed storage capacity0 TB
Maximum supported storage capacity10 TB
Number of storage drives installed0
Number of storage drives supported5
Flash memory128 MB
Internal memory1 GB
Internal memory typeDDR2
Processor frequency1.86 GHz
Supported network protocolsTCP/IP, CIFS/SMB, AFP, NFS, HTTP, HTTPS, FTP, FTP-SSL/TLS
USB 2.0 ports quantity6
Ethernet LAN (RJ-45) ports2
Dimensions (WxDxH)190 x 240 x 230 mm
Management platformLinux
Compatible operating systemsWindows 7/2000/XP/2003/Vista UNIX/Linux Mac OS 9 / X
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)0 - 80 %
Power supply unit (PSU) capacity200 W
Weight and Dimensions IconWeight and Dimensions
Weight7200 g

Related product manuals