Thecus N5500 User Manual

E. Reconnect a Stack Target
The enabled stack target devices may be disconnected by situations such as power
outages or network disconnects. When this happens, the Reconnect button will
available. To attempt to reconnect the stack target, click Reconnect.
ISO Mount
The ISO Mount feature is very useful tool from Thecus products. With it, users can
mount an ISO file and having export name to display all details from mounted ISO
file.
From the main menu, the ISO Mount feature is located under “Storage”. Please refer
the figure below for reference.
Select on the ISO mount function and you will have the screen shot appear as
following.
77

Thecus N5500 Specifications

General

RAID levels	0, 1, 5, 6, 10, JBOD
Storage drive size	3.5 \
Hot-swap drive bays	Yes
Storage drive capacity	- GB
Supported file systems	EXT3, XFS, ZFS
Storage drive interface	Serial ATA
Total installed storage capacity	0 TB
Maximum supported storage capacity	10 TB
Number of storage drives installed	0
Number of storage drives supported	5
Flash memory	128 MB
Internal memory	1 GB
Internal memory type	DDR2
Processor frequency	1.86 GHz
Supported network protocols	TCP/IP, CIFS/SMB, AFP, NFS, HTTP, HTTPS, FTP, FTP-SSL/TLS
USB 2.0 ports quantity	6
Ethernet LAN (RJ-45) ports	2
Dimensions (WxDxH)	190 x 240 x 230 mm
Management platform	Linux
Compatible operating systems	Windows 7/2000/XP/2003/Vista UNIX/Linux Mac OS 9 / X
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	0 - 80 %
Power supply unit (PSU) capacity	200 W

Weight and Dimensions

Weight	7200 g