EasyManuals Logo

Thecus N5500 User Manual

Thecus N5500
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
With RAID level migration function, it has two different type “On line” and “Off line”
alone with limitation as listed below.
1. During RAID level migration, it is not allowed reboot or shutdown system.
2. Off line RAID level migration, all services will stop and data is inaccessible.
3. To have ZFS file system created doing on line RAID level migration from R1
to R5 or R1 to R6, the all services will restart and volumes “user data”,
“iSCSI” and “Target USB” are read only during operation.
4. To have ext3 and XFS file system created doing on line RAID level
migration from R1 to R5 or R1 to R6, the all services will restart and
volumes “iSCSI” and “Target USB” are read only but “user data” is capable
read / write during operation.
5. The other combination to make as “On line” can have read / write work as
normal.
Below is a table listing of possible RAID migration schemes:
To
From RAID 0 RAID 5 RAID 6
RAID
0
[OFFLINE]
[RAID 0] HDDx2 to [RAID 0] HDDx3
[RAID 0] HDDx2 to [RAID 0] HDDx4
[RAID 0] HDDx2 to [RAID 0] HDDx5
[RAID 0] HDDx3 to [RAID 0] HDDx4
[RAID 0] HDDx3 to [RAID 0] HDDx5
[RAID 0] HDDx4 to [RAID 0] HDDx5
[OFFLINE]
[RAID 0] HDDx2 to [RAID 5] HDDx3
[RAID 0] HDDx2 to [RAID 5] HDDx4
[RAID 0] HDDx2 to [RAID 5] HDDx5
[RAID 0] HDDx3 to [RAID 5] HDDx4
[RAID 0] HDDx3 to [RAID 5] HDDx5
[RAID 0] HDDx4 to [RAID 5] HDDx5
X
Migrating a RAID volume could take several hours to complete
NOTE
58

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thecus N5500 and is the answer not in the manual?

Thecus N5500 Specifications

General IconGeneral
RAID levels0, 1, 5, 6, 10, JBOD
Storage drive size3.5 \
Hot-swap drive baysYes
Storage drive capacity- GB
Supported file systemsEXT3, XFS, ZFS
Storage drive interfaceSerial ATA
Total installed storage capacity0 TB
Maximum supported storage capacity10 TB
Number of storage drives installed0
Number of storage drives supported5
Flash memory128 MB
Internal memory1 GB
Internal memory typeDDR2
Processor frequency1.86 GHz
Supported network protocolsTCP/IP, CIFS/SMB, AFP, NFS, HTTP, HTTPS, FTP, FTP-SSL/TLS
USB 2.0 ports quantity6
Ethernet LAN (RJ-45) ports2
Dimensions (WxDxH)190 x 240 x 230 mm
Management platformLinux
Compatible operating systemsWindows 7/2000/XP/2003/Vista UNIX/Linux Mac OS 9 / X
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)0 - 80 %
Power supply unit (PSU) capacity200 W
Weight and Dimensions IconWeight and Dimensions
Weight7200 g

Related product manuals