EX-TRAFIRE
®
45SD
Operator Manual, Revision T-52-16
Symbols and marking
S Mark;
The mark indicates that the power supply and torch are suitable for use in environments with
danger of electrocution� The hand torches must have shielded consumable parts fitted to maintain
mark compliance�
CE Mark;
This marking signifies the manufacturer’s declaration of conformity to applicable European
directives and standards (EMC & LVD)�
C-Tick Mark;
This mark signifies compliance with appropriate Australian EMC standard�
EAC Mark;
This mark indicates products that conform to all technical regulations of the Eurasian Customs Union�
IEC symbols
Symbol Description Symbol Description
ON
Power is ON
BUS connector for further
IOT 4�0
OFF
Power is OFF
The terminal for the external
protective (earth) conductor
Plasma torch cutting
Disposal of product
The terminal for the external
protective (earth) conductor
Test mode
TIP/TORCH
Indicates the torch is connected�
Missing or loose nozzle
retaining cap�
Grid cutting mode
To Next Page
Loading...
