THERMACUT EX-TRAFIRE 45SD - Section 9: Accessories; Filter-EX Compressed Air Filter with Replacement Filter Cartridge

EX-TRAFIRE
®
45SD
Operator Manual, Revision T-5 9-69
Filter-EX Compressed Air Filter with replacement filter cartridge
EX-0-804-001 - Filter-EX Compressed Air Filter
(Standard package 1 piece)
EX-0-804-002 - Filter-EX Air Filter Cartridge
(Standard package 8 pieces)
Technical specification
Filtering Degree: 0�01 μinch – 0�25 μm
Maximum Pressure: 125 PSI – 8�5 bar
Maximum Flow @ 80%: 2700 SCFH – 1250 l/min�
Temperature Range: 15 – 140F / −10 +60 °C
Size Pipe: ¼ NPT
Dimension: Ø 5�2“ × 7�9“ – Ø 132 × 200 mm
This filter does not fall under the specification of pressure equipment and requires no revision�
Advantages of using the Filter-EX Compressed Air Filter:
• Removes solid particles, aerosols, and moisture from the compressed air�
• Elimination of the negative effects caused by humidity during cutting�
• Extends the service life time of the torch, leads and consumables�
• Reduces the risk of torch and power supply damage�
• Positive effect on the quality of the cut�
SECTION 9: ACCESSORIES
SECTION 9�
ACCESSORIES:
The maximum pressure of this item does not match the 10�0 bar rating
of the power supply�