Using recording features
26
Option Operation description
LED indicators
Status LED
(STATUS)
Recording LED
(REC)
Energy
saving
No impact
detected
Monitors movement in the area or impacts to the vehicle
while parking. Video will be recorded only when impact is
detected.
Off
Impact
detected
When an impact is detected while parking, a video is
recorded for 20 seconds from within 1 second after
detection and stored in the
Parking Impact folder. (The
buzzer will sound.)
• If you use the RADAR module (optional), the
energy saving mode is deactivated and the
product enters into the impact detection standby
status when an object is detected within the
radar area. (If no impact is detected, videos are
not saved and the product will return to energy
saving mode.)
• When an object or impact is detected within the
radar area, a video is recorded for 20 seconds
and stored in the Parking Impact folder. (The
buzzer will sound.) When recording is finished,
the product returns to energy saving mode.
(light on)
+
(flickers)
OFF
The product is powered off when electric accessories and
the engine are turned off.
Off
If parking mode settings are changed, the videos in the Parking recording folder will be deleted. (The videos
in the Parking Impact folder will not be deleted.) To prevent data loss, back up all parking mode videos
before changing parking mode settings
• You cannot use Motion Detection, Time Lapse, or Energy Saving at the same time.
• If you are not using the voice recording function, the status LED (STATUS) lights up in green (
).
To Next Page
Loading...
